PC60/PC70

  1. Location
  2. Home
  3. Products
  4. KOMATSU
  5. PC60/PC70

Komatsu Series Interchangeable Bucket Teeth & Adapters - Heavy-Duty G.E.T. Parts for PC60 to PC400 Excavators

  1. Home
  2. Komatsu Series Interchangeable Bucket Teeth & Adapters - Heavy-Duty G.E.T. Parts for PC60 to PC400 Excavators
Komatsu Series Interchangeable Bucket Teeth & Adapters - Heavy-Duty G.E.T. Parts for PC60 to PC400 Excavators

Upgrade your Komatsu excavator with our professional interchangeable bucket teeth series. Covering models PC60, PC120, PC200, PC300, and PC400, our G.E.T. parts are manufactured from high-strength alloy steel for maximum durability. Precision fit for OEM part numbers like 205-939-7120 and 20Y-70-14520. Global shipping and factory-direct pricing. Contact us for a full catalog today!

Komatsu Interchangeable Series — High-Performance Ground Engaging Tools

Komatsu Interchangeable Series — High-Performance Ground Engaging Tools (G.E.T.)

Our Komatsu Interchangeable Series offers a comprehensive range of Ground Engaging Tools (G.E.T.) designed to meet or exceed OEM specifications. These parts are engineered for high-impact resistance and superior wear life across the entire Komatsu excavator lineup, from the compact PC60 to the heavy-duty PC400. Utilizing advanced casting and heat-treatment processes, our bucket teeth and adapters provide the precision fit and durability required for demanding excavation, trenching, and mining environments.

1. Core Advantages

  • OEM Compatibility: Fully interchangeable with original Komatsu parts. Designed to fit standard Komatsu adapters and side-pin locking systems perfectly.

  • High-Strength Alloy Steel: Cast from premium wear-resistant alloy steel with a hardness rating optimized to balance penetration capability and structural toughness.

  • Self-Sharpening Design: The tooth profile is engineered to maintain a sharp leading edge throughout its wear life, reducing stress on the machine’s hydraulic system and improving fuel efficiency.

  • Extended Wear Life: Reinforced at critical high-stress points to handle high breakout forces in highly abrasive soil, bedrock, and rock conditions.

2. Technical Specifications & Part Numbers

Machine Model ClassOEM Part Number / Reference ReferenceGap / Pin Size Parameters
PC6025S-60 / LF60-2016 mm
PC100 / PC12020X-70-14151 / 202-70-1214018 - 20 mm
PC200205-939-7120 / 20Y-70-1452025 - 32 mm
PC300206-939-FS-14 / 207-939-3120 / PC300-AS30 - 35 mm
PC400208-939-312040 - 55 mm

3. Model Coverage Matrix

  • Mini/Midi Series: PC60, PC70, PC75, PC100, PC120, PC130.

  • Standard Series: PC200, PC210, PC220, PC240, PC270.

  • Heavy Duty Series: PC300, PC350, PC360, PC400, PC450.

4. Field Maintenance Note & Hardware Advice

Critical Safety & Replacement Protocol:
• Pin Inspections: G.E.T. component failures or lost teeth are frequently caused by reused, fatigued side pins or worn vertical locking clips. Always replace the locking pins and washers during every tooth change-out to ensure reliable retention under heavy cyclic vibration.
• Adapter Clearance: Check the adapter nose for structural wear or deformation prior to installing new tips. Excessive clearance between the nose and the pocket can cause localized bending stresses, leading to premature tip breakage.

5. Commercial Inquiry & Global Supply

  • Supplier: Xuzhou Sinoswift Import & Export Co., Ltd.

  • Contact: +86 13701956981

  • Email: [email protected]

  • Logistics: Door-to-Door Express and Global Sea Freight Ready

All manufacturer names, part numbers, and symbols are specified solely for identification and compatibility cross-mapping purposes. Our high-industrial-grade G.E.T. parts are built to maintain precise field fitment and consistent penetration performance. Contact our team to request a full product catalog!

Hot Recommendations