Optimize your 21-ton fleet's ditching efficiency with our custom-width narrow buckets (50cm, 60cm, 70cm, 80cm) for Hitachi ZAXIS 210 and ZX200 excavators. Engineered with heavy-duty NM400/NM500 wear plates and high-penetration side-pin teeth, these buckets provide precise, low-drag utility and pipeline trenching. Factory-direct wholesale pricing and global shipping. Request your technical quote today!
Our Hitachi ZAXIS 210 (ZX210) Interchangeable Series Utility Buckets are engineered to provide specialized excavation widths for precise trenching, utility routing, and foundation layouts. Custom-optimized for 20-ton to 24-ton class hydraulic excavators—including the Hitachi ZX200, ZX210, ZX210-3, ZX210-5G, and ZX210-6—this versatile multi-width setup is available in 50cm, 60cm, 70cm, and 80cm configurations. By scaling down the bucket width while maintaining the heavy-duty structural design of a standard 20-ton class attachment, these buckets concentrate the machine's maximum hydraulic breakout force onto a tighter cutting edge. This allows your fleet to slice cleanly through highly compacted hardpan, stony soils, frozen mud, and dense clay without structural flexing.
Targeted Narrow Geometry: Available in 4 precision widths (500mm to 800mm) to match exact pipeline, civil footer, and utility specifications, eliminating over-excavation and saving significantly on backfill material costs.
Premium Hardox/NM Wear Matrix: High-friction zones—including the front cutting lip, vertical side wings, and bottom wear runners—are fabricated from through-hardened NM400 / NM500 abrasion-resistant steel.
Flawless OEM Adapter Fitment: Pre-fitted with standard Hitachi-style two-strap weld-on adapters and heavy-duty side-pin bucket teeth, guaranteeing zero-play component lockups and rapid field replacement.
Tapered Self-Cleaning Profile: The bucket shell features a calculated dual-radius taper that releases sticky mud and wet clay effortlessly during rapid dump cycles.
| Specification Parameter | 50cm Variant | 60cm Variant | 70cm Variant | 80cm Variant |
|---|---|---|---|---|
| Bucket Width (mm) | 500 mm | 600 mm | 700 mm | 800 mm |
| Compatible Models | Hitachi ZX200, ZX210, ZX210-3, ZX210-5G, ZX210-6, ZX240 | |||
| Application Profile | Narrow Cable Trenching, Fiber-Optics, Water Pipes | Gas Mainlines, Foundation Footings, Drainage | Heavy Utilities, Medium Piping, General Trenching | Mass Footings, Sub-Base Drainage, Loading |
| Lip Base Thickness | 35 mm NM400 Steel | 35 mm NM400 Steel | 35 mm NM400 Steel | 35 mm NM400 Steel |
| G.E.T. Configuration | Standard Side-Pin Teeth (2–3 Tips) | Standard Side-Pin Teeth (3–4 Tips) | Standard Side-Pin Teeth (4 Tips) | Standard Side-Pin Teeth (4–5 Tips) |
| Mounting Ear Specs | Pin Diameter: 80mm | Arm Width: 307mm | Pin Centers: 460mm (Standard ZX210 Linkage) | |||
Reinforced Top Box Bracket: Continuous-weld box header frames distribute extreme prying forces uniformly away from the bucket ears, preventing corner weld tears.
Double-Strap Underbelly Runners: Thick horizontal wear bands reinforce the bottom of the bucket shell against harsh ground-scraping wear during leveling.
CNC Machined Bushings: Ear plates are line-bored using advanced CNC machinery to match original Hitachi bucket pins perfectly, preserving link arm alignment and protecting hydraulic oil seals.
All manufacturer names, model series, and part numbers are used for identification purposes only. These utility buckets are optimized for precision trenching and foundation work. For custom widths, special pin-center requirements, or non-standard linkage adaptations, please consult our engineering team.