Excavator Engine Oil Filter (15T - 31T Series)
High-Efficiency Protection for Diesel Engine Longevity
This high-performance engine oil filter is designed for XCMG XE-series excavators in the 15 to 31-ton range. It serves as the primary defense for the diesel engine, continuously removing combustion byproducts, microscopic metallic wear particles, and sludge from the engine oil. By maintaining optimal oil purity, this filter prevents abrasive wear on critical engine components like crankshaft bearings, pistons, and turbocharger bushings. Using this filter is essential for sustaining engine power, reducing internal friction, and preventing premature engine failure in heavy-duty construction applications.
1. Technical Specifications
| Parameter | Detail |
|---|---|
| Component Type | Spin-on Engine Oil Filter |
| Primary Function | Removes contaminants and sludge from engine lubricating oil |
| Compatibility (15T - 31T) | XE150WD, XE200D, XE200DA, XE205D, XE205DA, XE210WD, XE215D, XE215DA, XE240D, XE245DK, XE265D, XE270D, XE270DK, XE305D, XE310DA |
2. Operational Importance
The engine is the heart of your excavator. Engine oil serves not only as a lubricant but also as a coolant and cleaning agent. An outdated or inferior oil filter leads to oil degradation, which allows sludge to form and reduces the oil's ability to protect the engine during high-temperature operations. Regularly replacing the oil filter along with high-quality engine oil is the most critical maintenance step to prevent catastrophic engine breakdown and maintain fuel efficiency.
3. Maintenance Protocols
Replacement Cycle: Strictly follow the manufacturer's interval, typically every 500 operating hours. In environments with high idle time or severe loading (e.g., continuous heavy digging), more frequent changes are recommended.
Installation Advice: Clean the filter mounting base before installing the new filter. Lightly lubricate the new filter's rubber seal (O-ring) with clean engine oil before tightening. Tighten by hand according to the manufacturer’s specifications—do not over-tighten with tools, as this can damage the seal. After installation, run the engine at low idle for a few minutes and check for any leaks around the filter base.
4. Technical Support & Logistics
Supplier: Xuzhou Sinoswift Import & Export Co., Ltd.
WhatsApp: +86 13701956981
Email: [email protected]