XE135/155

  1. Location
  2. Home
  3. Products
  4. XCMG
  5. XE135/155

XCMG Excavator Engine Oil Filter (Aftermarket / Out-of-Warranty) 15T - 31T

  1. Home
  2. XCMG Excavator Engine Oil Filter (Aftermarket / Out-of-Warranty) 15T - 31T
XCMG Excavator Engine Oil Filter (Aftermarket / Out-of-Warranty) 15T - 31T

High-quality aftermarket engine oil filter for XCMG 15T to 31T excavators. Cost-effective replacement for out-of-warranty machines. Compatible with models from XE150WD to XE310DA.

XCMG Excavator Oil Filter (Aftermarket) | 15T-31T XE Series Parts

Excavator Engine Oil Filter (Aftermarket / Out-of-Warranty) 15T - 31T

Cost-Effective Filtration for Post-Warranty Engine Longevity

This high-performance aftermarket engine oil filter is designed for XCMG XE-series excavators in the 15 to 31-ton range that are currently out of their original factory warranty. Engineered to meet or exceed OEM flow and filtration standards, this filter provides a cost-effective solution for sustaining engine health. It effectively removes combustion byproducts, metallic wear particles, and sludge, ensuring that critical components like crankshaft bearings and turbocharger bushings receive clean lubrication, thereby extending engine life and maintaining peak performance without the premium cost of factory-branded consumables.

1. Technical Specifications

ParameterDetail
Component TypeSpin-on Engine Oil Filter (Aftermarket Grade)
Primary FunctionRemoves contaminants and sludge to protect engine components during the lubrication cycle
Compatibility (15T - 31T)XE150WD, XE200D, XE200DA, XE205D, XE205DA, XE210WD, XE215D, XE215DA, XE240D, XE245DK, XE265D, XE270D, XE270DK, XE305D, XE310DA

2. Operational Importance

For machines operating post-warranty, maintaining oil purity is the single most important factor in preventing engine degradation. This aftermarket filter provides the high-efficiency filtration required to minimize abrasive wear. By maintaining consistent oil pressure and flow, it ensures that your engine remains reliable and fuel-efficient, protecting your investment during the later stages of the machine's life cycle.

3. Maintenance Protocols

  • Replacement Cycle: Replace every 500 operating hours in accordance with standard maintenance schedules. For older engines or high-hour machines, more frequent oil and filter changes are recommended to clear accumulated internal contaminants.

  • Installation Advice: Clean the filter mounting base thoroughly before installation to ensure a debris-free seal. Apply a light coat of clean engine oil to the O-ring seal to ensure a proper vacuum-tight fit. Hand-tighten only to avoid over-compression of the gasket, which could lead to potential leaks. Monitor oil pressure gauges after the initial start-up following the filter change to ensure optimal flow.

4. Technical Support & Logistics

  • Supplier: Xuzhou Sinoswift Import & Export Co., Ltd.

  • WhatsApp: +86 13701956981

  • Email: [email protected]


Hot Recommendations